[visionlist] LED monitors
Andrew Watson
andrew.b.watson at nasa.gov
Thu Feb 19 08:05:00 PST 2009
Deborah,
Below is a section of a displays standards document that Louis
Silverstein and I wrote about LED displays.
I hope it is helpful.
OLED displays may well be useful in psychophysics, though I have not
tried them yet myself.
I believe they are used in some off-the-shelf adaptive optics systems
from Imagine Eyes (http://www.imagine-eyes.com/).
Andrew B. Watson
Senior Scientist for Vision Research
NASA Ames Research Center
Moffett Field, CA 94035-1000
(650) 604-5419
1.1.1.1 Light-Emitting Diodes (LEDs) and Organic Light-Emitting
Diodes (OLEDs)
The LED is a semiconductor device consisting of a single p-n
junction; light is emitted when the junction is forward biased by the
application of a suitable voltage. The first commercially available
LEDs were introduced into the marketplace in 1968 and quickly became
an important technology for indicator lamps and small segmented
alphanumeric displays.
LEDs are now capable of producing a full spectrum of colors with
very high color saturation and good luminous efficiency.
Nevertheless, relatively high cost, interconnect complexity and
manufacturing limitations in building high-density arrays of full-
color LEDs have restricted their usage primarily to very large
displays for digital signage and electronic billboard applications.
Organic LEDs (OLEDs) and polymer LEDs (PLEDs) are LEDs whose emissive
electroluminescent layer consists of a film of organic compounds
(Bulovic, 2005; King, 1994). These films emit light when subjected to
an electric current. The SPD of the emitted light depends on the type
of organic molecule in the emissive layer. Full-color OLEDs are
generally achieved by either spatial patterning of R, G and B emissive
materials or by use of a broad-band emissive material in conjunction
with a spatial pattern of R, G, and B color selection filters. The
intensity of the emitted light depends on the amount of electrical
current applied. The nonlinear relationship between voltage and
current provides OLEDs with a nonlinear transfer function which is
well characterized by a power function.
Claimed advantages for OLEDs include: simplified manufacturing
structure; compatibility with flexible substrates; lower manufacturing
costs than LCDs or PDPs; high contrast with true black level; high
luminance with good luminous efficiency; low power consumption; fast
temporal response; wide viewing angle; and excellent grayscale
performance (Bulovic, 2005; Ghosh & Hack, 2004). The principal
disadvantages include limited lifetime of OLED and PLED emissive
materials, lack of a stable short-wavelength emissive material with
good lifetime, differential aging of emissive materials with different
SPDs and susceptibility to contamination and damage from moisture. In
addition, reflections from metal cathodes and other metallic
structures within these devices can result in high levels of internal
specular reflection under ambient illumination with commensurate
degradations of ambient contrast. Circular polarizers may be used to
mitigate these reflections, but their use dramatically reduces the
luminous efficiency of the display.
OLED and PLED display technologies remain in a very active state of
development with a great deal of ongoing research on OLED / PLED
materials, display system architectures and manufacturing processes.
To date only a few small, mobile display products using OLEDs and
PLEDs have appeared and stayed on the market.
Display Technology Attributes
General Rating
Comments
Spatial Addressability
Spatial Resolution
High
High
-Spatial resolution can be enhanced by vertically stacked color pixel
structure
Temporal Response
Medium to High
-Native response in sub-millisecond range
-Temporal aperture extended by sample-and-hold mode of operation in
active-matrix configurations
Luminance
Medium to High
-Material dependent
-Use of circular polarizer to enhance ambient contrast reduces luminance
Contrast
Ambient Contrast
High
Low to Medium
-Excellent black levels
-Specular reflectance from metal cathode limits ambient contrast
-Circular polarizer can be used to enhance ambient contrast
Grayscale Performance
Very High
-Continuous analog grayscale capability
-transfer function a true power function
Viewing Angle
Very High
-Effectively Lambertian viewing
-Contrast enhancement filters can attenuate luminance off axis
Color Gamut
Ambient Color Gamut
High
Low to Medium
-Color gamut defined by OLED / PLED materials
-Specular reflections from metal cathode reduces color gamut under
ambient
-Circular polarizer can be used to enhance ambient color gamut
Physical Package
Very High
-Very small footprint & light weight
-Very small depth required
Application Flexibility
Very high
-Very amenable to portable or battery-powered applications
-Great flexibility in screen sizes
Other
-Prone to internal specular reflections under ambient
-Circular polarizer reduces luminance
-Differential aging of color materials can cause color shifts over time
-Active-matrix configurations prone to motion blur with dynamic imagery
Table 6. OLED / PLED Technology Attribute Ratings and Comments
On Feb 18, 2009, at 5:36 PM, Deborah Apthorp wrote:
> Hi,
>
> Does anyone know anything about the use of LED (NOT LCD) monitors
> for psychophysics? I am not sure if there are any available yet with
> a high enough refresh rate, but it seems as if potentially these
> could be very useful for vision research. I can't find much about
> them via Google so I wondered if anyone else in the vision community
> is exploring these possibilities.
>
> Thanks,
>
> Deborah Apthorp
>
> (University of Sydney, Australia)
> _______________________________________________
> visionlist mailing list
> visionlist at visionscience.com
> http://visionscience.com/mailman/listinfo/visionlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://visionscience.com/pipermail/visionlist/attachments/20090219/eb5a7eb3/attachment-0001.htm
More information about the visionlist
mailing list